Model |
SP-115APM |
ENCLOSURE SPECIFICATION |
|
System configuration |
Powered 2-Way Full Range |
LF Components & Loading |
One SK15300 15¡± woofer, vented |
HF Components & Loading |
One 1" voice coil compression driver(SK30STN) |
Operating Mode |
Active |
Frequency Response |
|
¡¾3 dB |
60Hz ~ 18kHz |
-10 dB |
55Hz ~ 19Hz |
Axial Sensitivity(dB SPL, 1 watt @ 1m) |
101 |
Nominal Input Impedance(ohms) |
4-8 |
Power Handling(Watts, Continuius) |
250 |
Power Handling(Watts, Peak) |
1000 |
Calculated SPL Limit (Referenced to 1 m) |
|
Peak |
131dB |
Long Term |
128dB |
Norminal Dispersion(degree@-6dB) |
|
Horizontal |
65 ¡Æ |
Vertical |
65 ¡Æ |
Optional Accessries |
STK "SPM35130", STK STAND "ST6180" |
Demensions ( ¡¾0.13 inch / ¡¾3 mm) |
Height 669 Front width 460 Rear width 105 Depth 424 |
Shipping/CBM |
0.225 |
Net weight |
27.34kg |
Shipping weight |
30.54 kg |
AMPLIFIER SPECIFICATION |
|
Output Power |
|
4 ohm |
300W (LF) |
8 ohm |
200W (HF) |
Frequency Response
|
20Hz ~ 30kHz |
THD 20Hz~30kHz |
¡Â0.05% |
Hum & Noise |
¡Ã70 dB |
Input Sensitivity |
MIC: -50dBm/XLR CD/TAPE: 0 dBm/Stereo RCA LINE: -10 dBm/TS 1/4" Phone and XLR |
Equalizer(+/-12dB) |
High: 10 kHz Mid: 2.5 kHz Low: 100 Hz |
Damping Factor |
¡Ã250 |
Input impedance |
1k ohm |
Connectors Input |
XLR,1/4"PHONE, Stereo RCA |
Connector output |
Neutrik Type Speakon(Amp) for EXT Speaker use XLR/TS 1/4" Phone(Line out) |
Power Requirements |
450 Watts |
Special Features |
1. Peak LED, Power LED 2. Convenction Cooling 3. Full Circuit Proection |